|
Front Brake Pads |
 |
 |
This is a really easy
replacement. Jack up the front and remove the wheel. With a screwdriver
pry off the metal retaining wire. Then Using a 7mm hex wrench remover the
two caliper retaining pins. Note that there is a mounting base for the
caliper that is to remain on. Rest the caliper on a box so as to not
strain the brake hose. Remove the old pads and depress the piston back
into the caliper. I used a C-clamp for this and it worked very well. Place
the new pads in and reinstall the caliper. Lastly reattach the retaining
wire. I kept my existing rotors and have had no braking problems. On the
first trip out pad grip was better than stock pads. Cost: $78 EBC Green Stuff Brake Pads Time: 20 min each Difficulty: Easy |
|
| Home |