|
Rear Brake Pads |
|
 |
Removal is simple and
straight forward. With a tap and a hammer knock out the two retaining pins
and remove the anti-squeal metal clip. Using a little force depress the
pads by pushing them into the brake caliper. Then pull out each pad with a
pair of pliers. If a pads is stuck use a screwdriver as a lever to work it
out. For 94-96 models a new brake kit should be purchased. During my installation one of my retaining clips broke when I removed it, and the pins had a lot of corrosion. Cost: $23 Stock Brake Pads ($46 97-98) $13 Brake Hardware Kit (94-96 Only) Time: 20 min each Difficulty: Easy |
 |
 |
| Home |